Shaft, Shaft Manufacturer, Shaft Suppliers, Turned Shaft, Turned Shaft Manufacturer

Driver Shaft Manufacurer

2011-04-30T04:20:00.000-07:00

Saraswati Manufacturing Works is worldwide leading manufacturer of Driver shafts which are in wide demand in the markets. To make these Shaft raw material used is mild steel, EN-8 steel, seamless pipe and synthetic rubber pipe, which are procured from the reliable vendors of the markets.

A Drive Shaft, Drive Shaft, driving shaft, propeller shaft,shaft is a mechanical component for transmitting torque and rotation, usually used to connect other components of a drive train that cannot be connected directly because of distance or the need to allow for relative movement between them.

Our range of drive shafts undergo rigorous tests at different steps of manufacturing to ensure their compatibility with desired applications. We use latest technology and machines, which makes our shafts widely demanded in automobile industries.

We have a well equipped research & development unit where our team members are involved in the development of products as per the current industrial standards.

Lead Screws

2011-04-16T03:02:00.000-07:00

Lead Screw | Lead screws Manufacturers | Screws | Screws Manufacturer

Saraswati Manufacturing Works makes high quality lead screws by rolling through precision dies.They are used in our positioning equipment. You can also buy the lead screws alone.

Sizes Available for Lead Screw Diameter & Pitch

Pitch	Diameter
Turns per inch	English Thread Lead Screws
Turns per inch	0.25"	0.375"	0.50"
2.5 *	no	yes	yes
5 *	no	yes	yes
10	no	yes	yes
20	yes	yes	yes
40	yes	yes	yes
Maximum length available	3 ft.	8 ft.	8 ft.
Turns per centimeter	Metric Thread Lead Screws
Turns per centimeter	7 mm	10 mm	14 mm
5	yes	yes	yes
10	yes	yes	yes
Maximum length available	3 ft.	8 ft.	8 ft.

And we can combine left and right hand threads on a single shaft for together + apart motion.

Our lead screws are 303 stainless steel, except the 5 and 10 pitch (Code: W1, W2 and P5, P10) lead screws which are electroless nickel plated, cold rolled steel.]]

Characteristics Of Lead Screws

A leadscrew nut and screw mate with rubbing surfaces, and consequently they have a relatively high friction and stiction compared to mechanical parts which mate with rolling surfaces and bearings.
Leadscrew efficiency is typically between 25 and 70%, with higher pitch screws tending to be more efficient.
The high internal friction means that leadscrew systems are not usually capable of continuous operation at high speed, as they will overheat.
Leadscrews are typically used well greased, but, with an appropriate nut, they may be run dry with somewhat higher friction. There is often a choice of nuts, and manufacturers will specify screw and nut combination as a set.
The mechanical advantage of a leadscrew is determined by the screw pitch and lead.
A lead screw will back drive, whereby forces on the nut applied parallel with the lead screw will cause a free-moving leadscrew to begin to rotate.

Advantages

Large load carrying capability
Compact
Simple to design
Easy to manufacture; no specialized machinery is required
Large mechanical advantage
Precise and accurate linear motion
Smooth, quiet, and low maintenance
Minimal number of parts

Disadvantages

Due to the low efficiency they cannot be used in continuous power transmission applications.
They also have a high degree for friction on the threads, which can wear the threads out quickly.

Turned Shaft | Lead Screw | Rollers | Hollow shaft | Piston Rods Manufacturers | Suppliers & Exporters in India

2011-04-01T04:51:00.000-07:00

WELCOME TO SARASWATI MANUFACTURING WORKS

Long Turning Grinding & Hard chrome Plating in Shaft, Screw, & Rollers for all types of machines. (Length= up to 15 metres, Diameter = up to 1.5 metres).

We take this opportunity to introduce ourselves as a leading manufacturer of Turned Shafts, Screws, & Rollers for any type of machine with required specification with grinding, Hardchrome plating. We are in same business since 1960. We pioneered the shaft industry with the backup of our vast experience of 35 years and a team of talented technicians.

We have ultra modern machines & instruments in our workshop.

We are manufacturer & Exporter of Shaft, Shaft Manufacturer, Lead Screw, Screws, Lead screws manufacturers, Rollers, Tie Bars, Hardchrome Plated Rollers, Ram, Mandrills, Piston Rods, Rotor Shaft, Hollow Shaft, Pilger Screw Manufacturers, Suppliers & Exporters in Ahmedabad, Gujarat, India.